How Do You Measure The Depth Of A Closet?

What is the size of a closet?

Dimensions You Need to Know The ideal reach-in closet (we’re not talking walk-ins here) is 6 to 8 feet wide and 24 to 30 inches deep.

Standard double doors are best, assuming there’s room to swing them open..

What is width depth and height?

Width (W): The measurement of the product from left to right. Height (H): The measurement from the top of the product to the floor (if it is free-standing) or to the bottom of the product. Depth (D): The measurement of the product from front to back.

How is depth of shelf measured?

Measure In Easy Steps: Click the sections to the left to view each step. Measuring underneath of the cabinet is easier, but make sure to keep the measuring tape parallel with the front edge. Measure the depth of the “floor” of the cabinet. This will typically be a little deeper than the upper shelves.

How do I determine my wardrobe size?

The first step is to calculate the amount of work needed in terms of square feet (sqft). This is done by multiplying the height and width of each of the components (of the front side). If your wardrobe is 5 ft wide and 7 ft tall, the total sq ft of the furniture is 7 ft x 5 ft, i.e. 35 sq ft.

What is a good size master closet?

Layout and Space Requirements A walk-in master closet should be a minimum of 7-by-10 feet, and preferably 100 sq. ft. for two users. That gives you space to line two or three walls with shelves, cubbies, and poles, and the elbow room to reach them easily.

How big is a standard bedroom closet?

A typical closet is approximately 24-inches deep. A walk-in closet should be at least 36- to 48-inches deep. The width of the closet ideally is half the width of the room, if not more. A standard 12-by-12 bedroom would ideally have a closet 6-feet wide by 48-inches deep.

Which ply is better for wardrobe?

If the height of wardrobe is going to be 7ft then plywood is the best material to be used. But if the height of the wardrobe is more than 7ft then ‘Block Board’ is the best choice.

What is the depth of a standard closet?

When designing a closet, consider the specific efficiencies of each different storage element to better serve your closet needs. The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired.

How wide is a coat hanger?

17-18 inchesStandard-sized adult hangers measure 17-18 inches. Our over-sized hangers measure 19″ wide, giving more support to heavy coats or larger jackets.

What is length and width?

Width or breadth usually refer to a shorter dimension when length is the longest one. … Length is the measure of one spatial dimension, whereas area is a measure of two dimensions (length squared) and volume is a measure of three dimensions (length cubed).

How much does it cost to build a fitted wardrobe?

For a basic built-in wardrobe this may be roughly $1,000 and for a high-end built-in the quote could be up to $5,000. As for walk-in wardrobes – depending on the complexity and size of the job – it can be estimated to cost closer to the $30,000 mark.

How many plywood sheets do I need for wardrobe?

Divide by the total square footage by the square footage of a sheet of plywood to find the number of sheets required to cover the space. A 4×8 sheet of plywood is 32 ft2. For example, if the area to be covered in plywood is 800 ft2 then 25 sheets of plywood will be needed to cover it.

How do you measure the depth of a wardrobe?

For a wardrobe wall space, measure the depth from the back wall to the outside of the side walls. Measure on both sides. See Diagram 3. For a reach in closet, measure, measure the inside space between the front and back walls on both sides of the door.

What is depth of shelf?

Shelf depth is determined by the size of the items to be stored, generally within the range of 6 to 24 inches. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.